Skip to product information
1 of 7

Noseto

Noseto Ryusei Sakimaru Sashimi Knife 300mm with Ebony Olive Wood Handle

Noseto Ryusei Sakimaru Sashimi Knife 300mm with Ebony Olive Wood Handle

Regular price $232.00 AUD
Regular price Sale price $232.00 AUD
Sale Sold out
Taxes included.
Add Custom Engraving
Quantity

Noseto Ryusei Sakimaru Yanagiba 300mm

A 300mm single-bevel sashimi knife with a sakimaru tip, a VG10 core at 60 HRC, and a handle in olive wood and ebony. The longest blade in the Ryusei line, made for taking a full slice off a large fish in one pull.

Why a yanagiba

A yanagiba does one thing. It takes a single draw stroke, heel to tip, with no sawing and no second pass, and it leaves a cut face so clean it changes how the fish eats. That is not a flourish. A torn surface loses moisture and dulls the flavour, which is why sashimi is cut this way and why a western slicer cannot substitute.

The sakimaru tip is the curved form, sweeping up to the point rather than meeting it at a hard angle. It is the older and more formal of the two profiles, it will not catch or dig the way a sharp kiritsuke tip can at the end of a stroke, and it is the shape most often chosen when the knife is going to be seen as well as used.

Why 300mm

The whole technique depends on the blade being longer than the cut, so the stroke finishes before the blade runs out. At 270mm you are working within the limit on a large loin. At 300mm a full saku block of tuna, a side of kingfish or a large salmon loin comes off in one unbroken pull with length to spare.

That reach needs the bench and the board to use it. For a home kitchen or a smaller counter, the 270mm is the more practical knife.

The steel

A VG10-grade forged core, hardened to 60 HRC plus or minus 2, vacuum heat treated and deep frozen to stabilise the hardness and lift toughness. That is the hard end of the range, which is what a single bevel needs: the edge is ground at a very low angle and only hardness keeps it standing through a long service.

The grind

Single bevel, ground on one face only, with a concave hollow on the back. That hollow is the urasuki, and it does two jobs. It reduces the surface in contact with the fish so the blade glides instead of dragging, and it leaves a thin flat rim around the edge that makes the knife quick to true on a stone.

The edge is finished by hand under running water to a mirror polish. On a single bevel that polish is functional, not cosmetic. A polished flank releases, a scratched one sticks.

The spine tapers toward the tip, and the spine and heel are rounded so the knife sits comfortably across a long session rather than wearing a line into your index finger.

The handle

Olive wood and ebony with an imitation ox bone ferrule. Olive is dense with a strong figure that varies piece to piece, ebony is heavy and stable around water, and the combination puts the balance just forward of the grip, which is where you want it for a drawing cut.

Specifications

Type Yanagiba, sashimi knife, sakimaru tip
Blade length 300mm (11.8")
Blade steel VG10-grade forged core
Hardness 60 ± 2 HRC
Edge Single bevel with concave back (urasuki)
Spine thickness 5mm, tapering to the tip
Handle Olive wood, ebony, imitation ox bone
Weight Approx. 235g

Care

Keep it off bone and frozen product, and never twist or pry. A single bevel at 60 HRC is the least forgiving edge in any kitchen.

Hand wash gently in warm water and dry immediately. Never the dishwasher. Store somewhere dry and ventilated, ideally in a saya.

Sharpen on a whetstone, and only if you know single-bevel technique. The bevel and the urasuki are both easy to ruin, and the flat back is unforgiving of a wrong angle.

View full details