Skip to product information
1 of 7

Noseto

Noseto Ryusei Deba 180mm with Ebony Olive Wood Handle

Noseto Ryusei Deba 180mm with Ebony Olive Wood Handle

Regular price $212.00 AUD
Regular price Sale price $212.00 AUD
Sale Sold out
Taxes included.
Add Custom Engraving
Quantity

Noseto Ryusei Deba 180mm

A 180mm single-bevel deba for breaking down whole fish. Thick through the spine and heavy at 300g, with a VG10 core at 60 HRC and a handle in olive wood and ebony.

Why a deba

A deba is a butchery knife for fish, and it works by weight rather than force. You place it and let it drop, and the mass carries it through the collar, the head and the spine of a fish that a thin blade would simply stop against. Nothing else in a Japanese kitchen does this job, which is why the deba and the yanagiba are bought as a pair: the deba breaks the fish down, the yanagiba slices what comes off it.

At 180mm it is the standard all-round size, comfortable on everything from a bream to a decent snapper. Smaller fish suit a 150mm, and a whole kingfish or tuna wants 210mm and up.

The blade

300g in a 180mm knife, which is roughly half again what any double-bevel blade of that length weighs. The thickness is not a compromise or a cost saving. It is the whole design, and a thin deba is a broken deba.

The steel

A VG10-grade forged core, hardened to 60 HRC plus or minus 2, vacuum heat treated and deep frozen to stabilise the hardness and lift toughness. That is harder than a traditional carbon deba, so it holds an edge longer through a shift and resists rust through wet fish work, but it will not tolerate levering. Read the care notes.

The grind

Single bevel, ground on one face only, with a concave hollow on the back. That hollow is the urasuki. It lets the blade run flat along a spine and release cleanly off the flesh instead of dragging, and it leaves a thin flat rim at the edge that makes the knife quick to true on a stone.

The thick spine and rounded heel let you drive with your off hand on the spine when you need to, which is how the head comes off.

The handle

Olive wood and ebony with an imitation ox bone ferrule. Olive is dense with a strong figure that varies piece to piece, ebony is heavy and stable around water, and on a knife this blade-heavy the dense handle is what keeps it from feeling like it wants to fall off the board.

Specifications

Type Deba, fish butchery knife
Blade length 180mm (7.1")
Blade steel VG10-grade forged core
Hardness 60 ± 2 HRC
Edge Single bevel with concave back (urasuki)
Handle Olive wood, ebony, imitation ox bone
Weight Approx. 300g

Care

Fish bone yes, everything else no. A deba is made to go through the head, collar and spine of a fish, using the heel of the blade and the weight of the knife. It is not made for beef or pork bone, poultry joints, or anything frozen, and at 60 HRC it will chip if you ask it to. Never twist, pry or lever with it.

Hand wash gently in warm water and dry immediately. Never the dishwasher. Store somewhere dry and ventilated, ideally in a saya.

Sharpen on a whetstone, and only if you know single-bevel technique. The bevel and the urasuki are both easy to ruin.

View full details