Passer aux informations produits
1 de 6

Noseto

Noseto Super Steel Kiritsuke Petty 135mm 110 Layers Damascus North America Ironwood Handle

Noseto Super Steel Kiritsuke Petty 135mm 110 Layers Damascus North America Ironwood Handle

Prix habituel $176.00 AUD
Prix habituel Prix promotionnel $176.00 AUD
Promotion Épuisé
Taxes incluses.
Add Custom Engraving
Quantité

Petty 135mm, Damascus

Product title: Noseto Damascus Petty 135mm, Ironwood Handle

Noseto Damascus Petty 135mm

A 135mm petty with a hardened 10Cr core, 110-layer Damascus cladding and a North American desert ironwood handle. The knife for everything that falls between a paring knife and a chef knife.

Why 135mm

Most kitchens own a big knife and a tiny one and nothing in between, which is why the big knife ends up doing work it is clumsy at. A petty is the fix. At 135mm it has enough length to work properly on a board, mincing garlic or slicing a shallot, while still being short enough to use in your hand for coring, segmenting and trimming. It is also the knife you reach for most often in a day, which is the argument for putting a good edge on it rather than treating it as an afterthought.

The steel

The cutting core is 10Cr, hardened to 60 to 62 HRC and ground to 15 degrees per side. That is the hard end of the kitchen range: it takes a very fine edge and holds it through a long prep list rather than a single service. The 110 layers you can see are the cladding, not the edge. They are there for the pattern and to wrap the hard core in softer steel that absorbs shock, while the cutting is done by the core alone.

The blade

135mm and 98g. Light enough to be precise in the hand and stiff enough to push through a firm apple or a potato without flexing away, which is where a flexible utility knife lets you down.

The handle

North American desert ironwood with a black G10 bolster. Ironwood is one of the densest timbers in the world, so it is dimensionally stable in a wet kitchen and needs almost no maintenance, and no two handles carry the same figure. G10 is a glass composite, waterproof and effectively indestructible, which is why it sits where the handle takes the most abuse.

Specifications

Type Petty, utility knife
Blade length 135mm (5.3")
Construction 110-layer Damascus cladding, 10Cr core
Core hardness 60 to 62 HRC
Edge angle 15° per side
Handle North American desert ironwood, black G10
Finish Polished
Weight 98g

Care

At 62 HRC this edge is harder and more brittle than a soft stainless knife, so it rewards care. Keep it off bone and frozen product, never twist or pry with it, and store it on a magnetic rack or in a saya rather than loose in a drawer where it will chip against other steel. Hand wash in warm water, dry straight away, never the dishwasher. Maintain the edge on a whetstone.

Saya sold separately.

Sharpening

We sharpen by hand in the basement at 137 Broadway. Hard Damascus-clad knives are easy to ruin on a machine, so bring this one to us rather than to a mobile service.

Afficher tous les détails